Guidolin Agrimac are your local supplier for quality made Piranha Slashers.
SINGLE ROTOR SLASHER
1300, 1600, 1900, 2200 & Optional Extras
Single Rotor are designed for 35-100hp tractor range and come in 4 different sizes which have the following features.
- One piece folded and fully reinforced HU300 grade 4mm or 350 grade 5mm main deck with a easy clean top design.
- Dual Category pick up pins Cat 1 & 2 with slotted top link for contour following.
- Heavy duty roller hollow section headstock with RHS rear support arms for ultimate deck strength which is available in either Centre Mount, Offset or double headstock.
- Zinc planted 10mm Front and rear safety chains curtains with wire rope replacement system.
- Piranha Slashers are now all Sand blasted and finished with a high quality powder coat.
- Choice of 50hp, 75hp or 100hp gearboxes.
- Drive shaft is a telescopic trilobal profile in either a 6 or 8 series shaft with an easy maintenance lever lock cover.
- Drive line is protected by either a 2 or 4 plate friction slip clutch, and is covered by a hinged flip up cover for easy PTO attaching and serviceability.
- Laminated spring steel blade beam with hardened dip down twisted mulching blades on a hardened swing back bush, or the optional dual blade mulching kit.
- Half sizes are available on request eg. 1750mm wide.
To enquire about this slasher,
Phone - Marcel Guidolin on 0427 643 444
Email - marcel@g-a.com.au
View Brochure Here:
