Guidolin Agrimac are your local supplier for quality made Piranha Slashers.
TWIN ROTOR SLASHER - DROP CENTRE
1850, 2000, 2100, 2300, 2600, 2900, 3200
Twin Rotor Drop Centre Slashers are designed V type inter rows, the wings free float and can accuratley follow the V contour. They are suited to 40-120hp tractor range and come in 7 different sizes which have the following features:-
- Three piece folded and fully reinforced HU300 grade 4mm or 350 grade 5mm main deck with a easy clean top design.
- Full length stainless steel hinge pins for ultimate strength and longevity.
- Come standard with 2 rear & 3 front rollers to follow ground contours of V-Shaped vineyards or orchards.
- Dual Category Pick up pins Cat 1 & 2 with slotted top link for contour following.
- Heavy duty rolled hollow section headstock with RHS rear support arms for ultimate deck strength.
- Piranha Slashers are now all Sand blasted and finished with a high quality powser coat.
- Zinc plated 10mm Front and rear safety chains curtains with wire rope replacement system.
- Unique Y-Pattern gearbox configuration for a more compact design.
- Drive line is protected by either a friction slip clutch, and is covered by a hinged flip up cover for easy PTO attaching and servieability.
- Laminated spring steel blade beam with hardened dip down twisted mulching blades on a hardened dip down twisted mulching blades on a hardened swing back bush, or the optional dual blade mulching kit.
- Half sizes are available on request eg. 1750mm wide.
Drop centres are designed for V shaped or delved ground, they have two rotor gearboxes that are on individually floating wings that follow the contours of the V ground. They have one main power divider that drives the two rotor gear boxes at 40 degree angles via two short star shaft pto shafts. The hinges use a full length 22mm stainless steel hinge pins and allow the unit to mow up to a 15 degree V on each wing or 30 degree combined. Drop centres come standard with two rear rollers and three front rollers to keep snug to the ground contour.
To enquire about our Slashers please call Andrew Raccanello on 0488 340 099 or
Marcel Guidolin on 0427 643 444.
